We suggest having your water dispenser cleaned every 6 to 12 months by our factory certified service technicians.

GO WITH THE PROS!

For only $20.00:

We do a complete break down of your machine, drain the water from the reservoir as well as our 4 point system:

1. We do an extensive interior sanitizing with our sterilizing machine. Our ozonating machine removes oxygen therefore killing all living organisms in the water leaving your water bacteria free!




2. We do an extensive cleaning of the exterior of the cooler as well as all its components.




3. We pressure test the cooler to check for any leaks.




4. We do a final test to make sure the water temperatures are accurate. The hot is hot and the cold is cold.

For those who prefer to "do it yourself," here are some simple steps to follow:

1. Unplug the cord from your electrical outlet. Let the cooler stand for 15 minutes until it reaches room temperature.




2. Remove the empty water bottle. If the bottle is NOT empty, cap the bottle before removing.




3. Remove any water guards/baffles.




4. Drain any remaining water in the reservoir.




5. Add 1/2 teaspoon of regular, liquid bleach and 1 gallon boiling water to the reservoir. USE CAUTION.




6. Let the solution set in the reservoir for 5 minutes.




7. Wearing clean rubber gloves, use the scrub brush to clean the reservoir. At this time the water guard/baffle can be cleaned and placed back onto the reservoir.




8. Drain out the solution through the faucet(s). Add 1 gallon boiling water. USE CAUTION.




9. Wearing clean rubber gloves, use the scrub pad to clean the faucet(s), body and handles of the cooler. Drain out the water through the faucet(s).




10.   Place a full bottle of water back on top of the cooler and plug back into the outlet. Allow 20 minutes for the water to heat up/cool down to the appropriate temperatures. ENJOY!

ADDITIONAL SERVICES AND REPAIRS:

Coming soon!